Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Punch That Cow(hide)
This sturdy steel punch for leather goods has a coiled-steel spring, and (6) screw-in punches. Make 2, 2.5, 3, 3.5, 4 and 5mm holes, even in heavy leather. 8-1/2" long OA.
 |
92453 LEATHER PUNCH |
Popular Tags:
clf
oldscratch
kit
|
Add Tag 
Pocket Toolbox
Granted, you'll need a fair-sized pocket, but this little tool set packs a lot of equipment (25 pieces) in a very small space. The 6" x 4" x 2" thick gray plastic box holds a 5-1/4" needle nose pliers; 4-1/2" side cutters; 4-3/4" tweezers; (5) different flathead jeweler's screwdrivers between 1.5 and 3mm plus a #0 Phillips; a 4-5/8" long plastic-handled driver and adapter with a 3" socket holder, #5, 6, and 8 sockets, (6) flathead bits, #s 1, 2, and 3 Phillips bits, T10, T15, and T20 torx bits. Whew!
|
92813 25 PIECE TOOL SET |
Want To Just Punch Something?
Well, here you go. This very high-quality punch set is made for leather, faux-leather, hardboard, soft wood, paperboard, plastics and soft metals. Includes (9) sharp-edged punches (3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 25/32", 1", 1-1/4") that screw onto the heavy-duty driver. A spring-loaded guide holds the punch 3/16" above the material, ready for you to give it a whack with a hammer or the heel of your hand for a good, clean cut. Comes in a black-plastic carrying case.
|
92968 LEATHER PUNCH |
Popular Tags:
oldscratch
2195
Lobster
|
Add Tag
Steel Contour Gauge
Tightly bound, too, so it will keep the shape you use it to mimic. Measures 6" long, with approx (32) 3-1/8" pins per inch. Press them into a contour and they'll hold the shape for transferring to tile, duplicating moldings, etc. Includes an adapter plate so if you buy two gauges you can lock them together for corner angles.
|
93500 CONTOUR GAUGE |
Old Codger's Carving Set
Not an old codger? Get an early start. This was made for sitting on the porch, carving family heirlooms after supper. The pressboard case holds a 6-piece wood carving set with (3) small straight gouges, (1) straight chisel, (1) V-gouge and (1) skew chisel. All are approx 5" long, with wooden handles. Be even better if you used them while an old dog was asleep at your feet, but we don't sell old dogs.
|
92793 WOODCARVING SET |
Hey, Punk!
Wanna make your own leather clothes? Start with this 3-piece leather punch set with (2) eyelet punches, 4mm and 9mm, plus a rotary leather punch that makes 2, 2.5, 3, 3.5, 4, and 4.5mm holes. Comes complete with a couple of dozen eyelets for the 4mm and 9mm holes. When you're done, lend them to the old man to let out that belt of his.
|
92967 LEATHER PUNCH SET |
Popular Tags:
2tonechaos
tools
KDClist
|
Add Tag
Who's A Chiseler?
Could be you, as soon as this set of high-carbon-steel wood-carving chisels and gouges arrives. Handy for hobbyists and woodcarvers, and useful on the lathe. All have impact-resistant handles. The 13-piece set includes a 1-3/8" wide chisel; 3/8" bent V-tool; 7/16" V-tool; gouges at 15/32", 17/32", and 21/32"; bent gouges at 7/32" and 1/2"; a straight rasp and a bent rasp, both 7/16". The rasps are 6-3/4" and 7-3/8" long; all the other tools are 8-1/2" long. You also get 5-7/8" long x 2" x 1" double-grit sharpening stone, a 6" long x 1/2" dia carbide round, and a 3-square stone, all in a black canvas roll-up carrying pouch.
|
92966 PRO WOOD CHISELS |
Trunk Shovel
Like the army's classic "entrenching tool," except this one doesn't fold. Measures 28" long with a one-piece tempered-steel blade 8" long x 5-3/4" wide, a fiberglass shaft, and a comfy molded plastic handle. Dig it.
|
93199 TRENCH TOOL |
Attention Stampers
And florists, artists, crafters and hobbyists in general. The ProHeater from Surebonder® is a lightweight hand-held heat gun made for curing embossing powders, shrink-wrapping gift baskets, drying ink and glues, shrinking plastic tubing, and similar tasks. The ProHeater is easier to handle and safer than heavy-duty commercial heat guns. It draws approx 350W, will heat to 400°F, and measures 8-3/4" long x 2" x 2" with a 6-foot cord. It has a recessed metal tip inside a 5/8" nozzle and a clip-on table stand. The duty cycle is 10 minutes with a 2-minute cool-down. UL listed.
 |
92700 PRO HEATER |
Popular Tags:
KDClist
joker18
mojoblue66
|
Add Tag
Portable PVC Saw
Our 35" x .045" stainless steel cable saw, made for cutting PVC or laminates, coils up to store in no space at all. Also useful for temporarily hanging pipe from ceilings or under floors during installations. Sturdy, 3-1/4" long, plastic handles.
|
38356 PORTA-SAW |
HOTSPOTS
Our thinnest thermometer, and maybe the world's thinnest, is a 6" long x 1/2" wide strip of slim, flexible black plastic, with temperature readings for 0°F to 100°F in 3° increments and -18°C to 38°C in 5° increments. (Most liquid-crystal thermometers are limited to a 60° to 90° range.) Buy a pair and stick one each on your rear-view and side-view mirrors to measure the temperature on both sides of your car, or any other place you need an unobtrusive weather instrument. Or stick one on your forehead so everybody can see how hot you are. They're peel-and-stick, and can be easily trimmed to a shorter temp range. From HotSpots".
|
37862 STICK 'EM UP |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
